| Prismatic steel consructions can be manufactured as insulated or non-insulated depends on the request.
 TECHNICAL DATAS: Constructions are manufactured with respect to 1.st degree seismic zone.
Wind velocity 102 km/hour (h:0-8 m) TS498 ,snow load 80 kg/m².The constructions where manufactured in the factory area,can be assembled to the concrete ground which was pre-poured by the employer company.If required they can be dismantle and erect into another concrete ground several times.
 DIMENSIONS: Construction width 10 m(single span - Figure 1) with column height h:4-5-6 m.Building length can be expanded in multiple of 2.5 m. Under the condition of 10 m of block width, it can be made triple, fourfold, fivefold blocks (Figure 2).
BEARING SYSTEM: NPI columns are made of filled framed steel truss and purlins with the wind connections .Steel bolts and nuts will be used for these connections.
ROOF AND FACADE COVERINGS: 0.50 mm thick, galvanized trapezoidal sectioned steel sheets will be fixed to the purlins by using galvanized coated and screws with gasket .
DOORS: 350 cmx350 cm as sliding doors.( 900 mmx2000 mm sized door on the sliding door for service entrance.)
PAINTING: Whole steel system will be painted with 1 layer anti-rust to prevent rusting and 1 layer with oily based painting
INSTALLATIONS: NA.
|
