* The most important advantage of steel construcion system is its lightening property and resistancy to seismic features. The statics of the constructions are calculated with respect to the 1 st degree seismic zone.

• Constructions are capable of dismantling and erection for several times.

• Prefabricated constructions are delivered including electrical and sanitary installations, painting, door and window frames and glazing. And also constructions may include floor concreting and covering central heating installation according to the design content and request. All the materials are certified by TSE and most have ISO 9001 certificate.

• The bearing system of the buildings are steel constructions Hekimboard / Turksiding brandmarked Fibercement boards that excludes asbestos with its resistant to water and FIREPROOF purposes, where used as outer and inner surface claddings, ceiling and mezzanine coverings in prefabricated building and container production facility, are comprised of cement, silicate and cellulosed fiber and produced in high pressure and temperature with kiln drying manner. By using this method the deformation of the board can be prevented from thermal variations and climatical conditions.

• The lasting of the prefabricated constructions are equal to the concrete buildings if proper maintanence has taken periodically.

• This maintanence of the constructions is possible with painting and door window maintance periodically.

• The transportation facility of prefabricated buildings and containers can be done by trucks, trailers, vessels, loading containers, trains or cargo airplanes.

• Constructions are produced as heat insulated.

• Constructions are also produced for every kind of climatical conditions and the production has done by concerning the climatical datas of the location of constructions.

• Prefabricated buildings can be manufactured in any given spon design and square meter, out of our standart plans. They can be one two or three storied.

• Renovation of the building is possible if required.

• The preferences to the light prefabricated constructions increases with its short time production method and mounting facility and also allow for an easy dismantling - erection for several times. The manufacturing process of 1000 m2 light prefabricated building takes 15 days. The rough mounting process of 50 m2 light prefabricated building takes one day with a mounting team of 4 person.

• Pre - manufactured light prefabricated constructions are mounted on the pre-poured concrete ground.

• International transportation and packing codes are following during the delivery process for foreing country products.

• The mounting of prefabricated buildings to the ground has done via anchorages or steel inserts. By this building and concrete acts as a whole.

• Constructions have 1 year warranty for defects caused by production and workmenship.

• Galvanized steel sheets, onduline and shingle are used as roof coverings.

• Ceramic tiles are easily appliable for wet volume walls.

• Ceramic tiles and other materials are binding to the boards beter with the honeycomb texture of Fibercement boards.